Configuration Issues - Iomega StorCenter ix2-200 Release Notes

Known issues and limitations

Configuration issues

When a firewall is configured, cannot discover Iomega StorCenter device
Directory path depth and filename size limitations
Cannot access a secure folder through DFS
Domain status is incorrect on device after powering off trusted domain server
After configuring Amazon S3 storage, incorrect error message may appear
12 Iomega StorCenter Network Storage Release Notes version 3.1.14
Description: The Iomega StorCenter device cannot be discovered using the Iomega
StorCenter Manager, possibly due to a firewall configuration.
Affected SW Releases: 2.6, 3.1.10, 3.1.12, 3.1.14
Workaround: When you fail to find a Iomega StorCenter device on the network
using the Iomega StorCenter Manager, it is recommended that you check if the
Iomega StorCenter Manager software is being blocked by an existing firewall. If
you have a firewall and during the Iomega StorCenter device setup the firewall
opens a dialog presenting access options, you must choose Allow access. As a
workaround, if the firewall can be configured to allow access to specific
applications or ports, it is recommended to configure a rule that allows access on
local UDP port 2152 for the whole application.
Description: The absolute path to a directory within a folder cannot be greater than
1024 bytes, and the filename component cannot be greater than 256 bytes.
Affected SW Releases: 2.6, 3.0, 3.1.10, 3.1.12, 3.1.14
Workaround: —
9061
Description: When Windows DFS is enabled, a user may browse through the
directory tree and see a folder, but not be able to access that folder due to
insufficient permissions.
Affected SW Releases: 2.6, 2.6.13, 3.0, 3.1.10, 3.1.12, 3.1.14
Workaround: Ensure appropriate users are granted permission on all secured
folders prior to securing them and making them a part of the DFS Workgroup.
Description: After enabling a trusted domain, joining it to the local domain, adding
users to the domain, then turning the Iomega StorCenter device off and on, users
or domain status may be reported incorrectly.
Affected SW Releases: 3.1.10, 3.1.12, 3.1.14
Workaround: —
Description: After enabling Amazon S3 storage, the user may receive a false error
message if they have reached the maximum number of Amazon storage buckets.
The message reads, "The Iomega StorCenter ix4-200d is not yet configured with
your Amazon S3 account information. The 'Amazon S3' application is disabled."
Affected SW Releases: 3.1.12, 3.1.14
Workaround: —
4106
1814 1448
18476
19548