Brother MFC-9330CDW Basic User's Manual page 36

Chapter 2
• When Label is selected in the printer
driver, the machine will feed the paper
from the manual feed slot, even if Manual
is not selected as the paper source.
• Make sure the paper or envelope is
straight and in the correct position in the
manual feed slot. If it is not, the paper or
envelope may not feed correctly, resulting
in a skewed printout or a paper jam.
• Pull the paper or envelope out completely
when you retry putting the paper into the
manual feed slot.
• Do not put more than one sheet of paper
or one envelope in the manual feed slot at
any one time, as it may cause a jam.
f
Send the print data to the machine.
NOTE
Remove each printed page or envelope
immediately to prevent a paper jam.
g
After the Touchscreen shows
Manual Feed, return to step e to load
the next sheet of paper. Repeat for each
page you want to print.
h
(For printing envelopes)
When you have finished printing, return
the two gray levers, that you pulled
down at step b, back to their original
positions.
i
Close the back cover (face-up output
tray) until it locks in the closed position.
26