Image 9.5 Elliptcal User Manual page 7

3. Apply a generous amount of the included
grease to the Ramp Axle (74).
Have a second person hold the Ramp (78)
near the Frame (1) in the position shown.
Insert the Ramp Axle (74) through the Ramp
and the Frame. Tighten an M8 x 25mm Patch
Screw (70), with an M8 Washer (64) and a
Ramp Cover (59), into each end of the Ramp
Axle.
Next, pull the Ramp Pin (90) and align the
Ramp (78) with one of the three holes in the
Frame (1). Then, release the Ramp Pin into
the Frame. Make sure the Ramp Pin is firm-
ly engaged in the Frame.
4. Identify the Left Pedal Arm (21), which is
marked with a "Left" sticker.
Attach a Pedal (19) to the Left Pedal Arm (21)
with three M4 x 19mm Screws (68) and three
Star Washers (85).
Repeat this step for the Right Pedal
Arm (not shown).
3
90
Grease
64
74
70
59
4
85
85
68
7
78
70
64
59
1
19
21