How To Insert Batteries - GE AE0CD10AM Owner's Manual And Installation Instructions

Operating the air conditioner.
General Procedure
NOTE: For best results, point the remote control
at the indoor unit.
Make sure power is connected and press the
1
ON/OFF pad to start the system.
Press the MODE pad to select the desired
2
operation mode.
Press the SWING pad for automatic rotation of
3
the louvers. Press again to stop the rotation.

How to Insert Batteries

The remote control uses two AAA batteries.
Remove the cover from the back of the remote
1
control and insert two new batteries (pay
attention to the polarity).
Reattach the cover.
2
NOTES:
I Do not mix new and used batteries or different
types of batteries.
I Remove batteries when the remote control is not
in use for an extended time.
I The remote control signal can only be received
within a range of 20 ft.
I The remote control should be placed about
3 feet or more away from TV sets or any other
electrical appliances.
Press the FAN pad to set the desired fan speed
4
(AUTO/Low/Medium/High).
Press the TEMP +/– pads to set the desired
5
temperature.
NOTE: For detailed remote control instructions, see
About the remote control section.
GEAppliances.com
Battery type: AAA
Battery cover
3