Attach The Seat Frame (7) To The Seat Carriage (11); X 16Mm Button Screws (80) And Four M8 Washers (60 - Epic 420 R Bike User Manual

5. Have another person hold the Console (4) near the
Upright (2).
Connect the Wire Harness (43) to the wire harness on
the Console (4). Next, connect the Pulse Wire (3) to
the pulse wire on the Console. Then, connect the indi-
cated ground wire to the smallest wire on the Console.
Carefully insert all excess wiring down into the Upright
(2). Attach the Console (4) to the Upright with four M4
x 16mm Screws (57). Be careful to avoid pinching
the wires. Next, press the bookrack onto the Console
in the indicated location.
6. Attach the Seat (9) to the Seat Frame (7) with four 1/4"

x 16mm Button Screws (80) and four M8 Washers (60).

7. Attach the Seat Frame (7) to the Seat Carriage (11)

with two M10 x 52mm Button Bolts (82) and two M10
Nylon Locknuts (63).
5
3
2
57
6
9
60
7
82
7
Bookrack
4
43
Ground Wire
Do not pinch
the wires
during this step.
7
60
80
7
11
63