Microphone Head Me 40 - Sennheiser MKH 203 403 803 User Manual

MICROPHONE HEAD ME 40
Supercardioid directional pattern. This-head has multiple applicat-
ions: to be used in acoustically poor rooms to suppress reverber-
ant sound pickup and to avoid feedback from loudspeakers.
Effectively cuts out environmental noise. All sounds reaching the
microphone from the rear are effectively attenuated.
90' 90'
180' 180'
_'000H,
4000H,
_500H,
n- 2000H,
. 8000H,
Frequency Response
22
Standard frequency response MKE 403
1
\
1
\
Frequency response. . . . . .
Acoustical mode 01operation
Directional characteristic
Sensitivity at 1000 Hz
Output impedance .. . .
Minimum load impedance
Recommended load
impedance
Bass attenuator ...
S/N to DIN 45590
Connector ....
Pin connections
Cable connector
Power suppiy
Battery operating time
Dimensions in mm
Weight
Finish
50.. .15 000 Hz
pressure gradient
transducer
super cardioid
0.3 mV/lLbar,f>3 mV/Pa
:t 2.5 dB
appx. 200 n
300 n(switch position I)
50. . . 15000 Hz
pressure gradient
transducer
super cardioid
0.3 mV / ILbar ,f> 3 mV/Pa
:t 2.5 dB
appx. 200 n
300 n (switch.position
I)
>5kfi >5kfi
(switch positions 11 and 111). (switch positions
11 and 111)
see "Technical Description K 3 N"
appx. 64 dB appx. 64 dB
3-pin, DIN 41524 3-pin CannonXLR-3
1 --> audio, 2 --> housing/ 1--> housing/ground,
ground, 3 -->audio to 2 --> aUdio,3 -->audio
DIN 45594
3-pin, DIN 41524
(e.g. T 3261001)
5.6 V battery powering
or phantom powering to
DIN 45596 lor
12. 48 V,
more than 600 hours
19/220 x 186
appx. 160 9
Satin nickel
3-pin Cannon
(e.g. XLR-3-11 C)
5.6 V battery powering
or phantom powering to
DIN 45596 for
12. .48 V,
more than 600 hours
19/220 x 201
appx. 170 9
Satin nickel
We reserve the right to alter specifications, especially with regard to technical
improvements.
23
-
110dB
-
n- -- - - - -- -- ---
-
.-
- --- n - - --n-
--
--
-
.-