Recalling Readings From Memory; Storing Meter Configuration Information - Fluke 8845A User Manual

8845A/8846A
Users Manual
For internal storage of readings, the number of readings stored will not
exceed 9999 readings regardless of the value set for number of samples.
To store readings in external memory (8846A Only)
1. Press M.
2. Press the STORE READINGS soft key.
3. Press the USB soft key.
4. Press the # SAMPLES soft key.
5. To adjust the number of samples, press either <-- or --> to select a digit.
6. With the number of samples set, press the ENTER soft key to return to the Store
7. Press the START soft key to begin storing measurements. The START soft key will
Each memory address will store up to 5000 readings. If the number of
samples is set to a value greater than 5000, consecutive memory files will
be used to store all the samples. If the readings fill the last file (999),
reading storage will stop.

Recalling Readings from Memory

To recall readings from internal memory:
1. Press M.
2. Press the RECALL READING soft key.
3. Press the RECALL INT MEM soft key.
To recall readings from external memory (8846A Only), the memory device must be
removed from the 8846A and plugged into a PC where the comma delimited files can be
read. Each file is labeled MEAS0XXX.CSV. The XXX is the file number starting at 001
and going up to 999. Each file is date and time stamped.

Storing Meter Configuration Information

Up to five meter configurations can be stored in the Meter's internal memory. The
8846A, with optional USB memory installed, can store an additional 99 configurations in
the external memory.
3-18
With the chosen digit selected, press the soft key labeled -- to decrement the digit
or ++ to increment the character.
Readings menu.
change to STOP which can be pressed to stop the storage process. When the
requested number of samples have been stored, the soft key label changes back to
START. The MEM annunciator in the display also illuminates while readings are
being stored.
The Meter displays the first stored reading from the internal file. Four soft keys
provide the means to scroll through the readings stored in the file. The FIRST soft
key displays the first reading in the file while the LAST soft key displays the last
reading. Use the <-- and --> soft keys to move forward and backward through
the file one reading at a time.
Note
Note