Fisher & Paykel DD24DCB7 User Manual page 24

Water softener
20
Notes:
If your water hardness is above 625ppm/36 gpg, we highly recommend you completely fill the
detergent dispenser for all programs except Rinse and the rinse aid setting should be at 5. If your
water hardness is above 625ppm/36 gpg, the wash performance of your dishwasher will decline.
You may hear some unusual noises when the water softener is in operation, this is normal.
How to fill the salt reservoir
Open the drawer(s).
1
Unscrew the salt reservoir cap by turning anticlockwise.
2
Place the salt into the salt container and pour the contents into the salt reservoir.
3
The salt reservoir can hold up to approximately 1 lb/0.5 kg of salt.
Fit the cap tightly back into its original position.
4
If you do not wash your dishes immediately after filling the salt reservoir, run a Rinse program to
5
remove any salt water or spilt granules.
Note:
When filling the salt reservoir, you may notice water being displaced from the water softener
overflow.
Salt
reservoir
Salt
container