IBM 412 - 412 Corded Phone Installation And Operation Manual page 29

3. Press the [SHIFT] key.
4. Press the desired Speed Dial key. A short ring will be heard to signal successful programming. The
[SHIFT] LED will revert to dark immediately after pressing the Speed Dial key.
Storing the Last Number Dialed into the First Group of Speed Dial Memory
1. Press the [STORE] key.
2. Press [REDIAL].
3. Press the Speed Dial key. A short ring will be heard to signal successful programming.
Storing the Last Number Dialed into the Second Group of Speed Dial Memory
1. Press the [STORE] key.
2. Press the [REDIAL] key.
3. Press the [SHIFT] key.
4. Press the Speed Dial key. A short ring will be heard to signal successful programming. The
[SHIFT] LED will revert to dark immediately after pressing the Speed Dial key.
Dialing Numbers in the First Speed Dial Group
1. Press the Speed Dial key to automatically access an available line and the extension will automati-
cally dial the stored number.
Dialing Numbers in the Second Speed Dial Group
1. Press the [SHIFT] key. The [SHIFT] LED will illuminate.
2. Press the Speed Dial key to automatically access an available line and the extension will automati-
cally dial the stored number.
Erasing First Group Speed Dial Numbers
1. Press the [STORE] key.
2. Press [*].
3. Press the Speed Dial key that you which to erase. A ring tone will be heard signaling successful
deletion of the Speed Dial number.
Erasing Second Group Speed Dial Numbers
1. Press the [STORE] key.
29