Pyle view PLVS92BK Operating Instructions page 2

I . Methods of remote using
a-I--Sw'itch for power supply
Exchange between V1N2
Analog variable decrease
rr-A,nah)g variable increase
Switch for mode
--+---'
II. Function keys panel
1
-.<:-=-'~
2 -....
F.?-.,..;
3
- ..,.--,+."' "
4
- -a-----,.;""
5
6
7
8
1.Exchange between16:9/4:3
2.Time
3.Exchange between v1/v2
4.Menu
Menu
5.Up
6.Down
7. Power on/off
a.Remote window
III Features:
Screen size: 9. 2 inches
System: NTSC/PAL
Display format:
16:9
Wireless Remote Control
TWO Video Inputs
Brightness:300CD/M2
For use with VCD/DVD/GPS/Camera
Power supply: DC 12V
IV
Attentionsspecial
1. When connect the electric power wires, you should
make clear about the positive and negative
electode (the red one is positive and the balck is
negative) . if you wrongly connected the fuse in the
filter box will be bloden protectively. please replace
the ruse in same parameter.
2. Because the LCD screen is the main component of
it should be paid attenteion to be damp-proof.
Insolation-proof and bumping-proof(never be extru ded)
3. The device must be installed firmlly to prevent falling
of device that will possiby cause personed injury
and device-broken.
4. The connecting-point of direct current (12v) should
connect on the Main line of storage battery as
pssible as it can, for keeping this device in normal
operation and be away from the arge voltage drop
influence