13.1 Overview
In WISP + UR mode, the NBG4615 has the same function as in WISP mode. In addition, it can
provide WiFi function to the clients on the LAN side.
In the example below, one NBG4615 (A) is configured as WISP +UR mode and another is used as
an access point (B). The NBG4615 (A) wirelessly connects to the available access point (B), and
can provide WiFi wireless function to clients on its LAN side.
Figure 71 WISP + UR Mode
13.2 What You Can Do
• Use the Status screen to view read-only information about your NBG4615
83).
• Use the LAN screen to set the IP address for your NBG4615 acting as an access point
10.5 on page
• Use the Wireless LAN screen to associate your NBG4615 (acting as a wireless client) with an
existing access point
13.3 What You Need to Know
The Monitor, Configuration and Maintenance screens in WISP + UR mode are similar to the
ones in Router mode. See
Guide.
NBG4615 User's Guide
A
WISP + UR
built-in
firewall
78).
(Section 12.5 on page
Chapter 15 on page 125
C
HAPTER
WISP + UR Mode
B
Access
Point
94).
through
Chapter 29 on page 221
1 3
(Section 11.5 on page
(Section
of this User's
99