Edimax CV-7438nDM User Manual page 33

Current
Password
New Password
Re-Enter
Password
You can modify the IP address of the wireless bridge, enabling it to become a
part of your local area network.
IP Address
Subnet Mask
Gateway
Address
Please write down and remember the new IP address you
assigned to the wireless bridge. If you forget this IP address you
may not be able to connect to the browser based configuration
interface in the future.
For static IP users, the wireless bridge needs to have an IP address
in the same subnet as your network, in order that you can access
iQ Setup/browser based configuration interface. For example, if
your static IP is 192.168.9.2 then you need to assign the wireless
bridge an IP address in the range 192.168.9.x where x = 3-254.
Each network device has a unique IP address.
To ensure that you assign a correct IP address to the wireless
bridge, you can also check the IP address of your router. Please
refer to
also provide you with such information as IP address, subnet
mask and gateway address.
Enter your current password. The default
password is 1234.
Enter your desired new password here. You
can use any combination of letters,
numbers and symbols up to 20 characters.
Confirm your new password.
Specify an IP address here. This IP address
will be assigned to wireless bridge.
Input the subnet mask of the new IP
address.
Input the network's gateway IP address.
V-1-4. How to Find Your Router's IP Address.
33
Your ISP can