Iv-4. Wireless Advanced - Edimax CV-7438nDM User Manual

WPS Status
Device PIN Code Displays the WPS PIN code of the wireless
(Client Device)
Configuration
Mode
Configure via
Push Button
Send PIN Code
to AP/Router
IV-4. Wireless Advanced
Displays WPS status. If data
encryption/security settings for the wireless
bridge's SSID have never been set,
"unConfigured" will be shown here. If data
encryption/security settings for the wireless
bridge's SSID have been set, "Configured"
will be shown here.
bridge.
"Enrollee" mode means the wireless
bridge will follow the wireless settings of
wireless router/access point for WPS
connections. "Enrollee" mode is fixed and
cannot be modified.
Click "Start PBC" (Push-Button
Configuration) to activate WPS on the
wireless bridge. WPS will be active for 2
minutes. The LED on the wireless bridge will
flash (white) while WPS is active.
The wireless bridge's WPS PIN code is
displayed here. Click "Send PIN" to
automatically send the PIN to the
router/access point.
In "Wireless Advanced" you can configure advanced
wireless settings. Please do not modify these settings
unless you are sure what effect the changes will have
on your wireless bridge; advanced settings are for
experienced users only.
Changing these settings can adversely affect the
performance of your wireless bridge.
29