Gateway M250 User Manual page 4

Using the Port Replicator
Top
Component
Power button
2
Icon Description
Press to turn the power on or off.
This power button works the same as the notebook
power button when connected to the notebook. For
example, if the notebook power button is set to
Standby/Resume mode, pressing this button will
place the notebook in Standby mode.
The power button has two indicators:
The outside clear plastic ring indicates the port
■
replicator power status. When the power adapter
is connected to the port replicator and plugged into
an outlet, the ring lights up.
The icon in the center of the power button indicates
■
the notebook power status:
On - notebook is on.
■
Blinking - notebook is in Standby mode.
■
Off - notebook is off.
■
For more information about changing the power
button mode, see "Changing Power-Saving Settings"
in Using Your Computer which has been included on
your hard drive. To access this guide, click Start,
All Programs, then click Gateway Documentation.
www.gateway.com
Power button