LG Pro Centric 32LP645H Commercial Mode Setup Manual page 23

Installer Menu Items 078 through 122
Menu
Function
Item
078 UPN MSB
079 UPN MSB-1
080 UPN MSB-2
081 UPN LSB
082 CHKSM ERROR
083 HANDSHK TIME
084 PERMANENT BLK
087 REAR RGB EN.
088 EN NOISE MUTE
090 KEY LOCK
091 HDMI2 ENABLE
092 HDMI3 ENABLE
093 RJP AVAILABLE
094 SAP MENU EN
096 DEF. ASP. RATIO
097 AUDIO OUTPUT
098 PRO:CENTRIC
099 BACK LIGHTING
102 ATSC BAND
103 ATSC TUNE MODE
104 START MINOR CH
106 ASP RATIO LOCK
116 VIDEO MUTE EN
117 FACT DEFAULT
118 POWER SAVINGS
119 DATA CHANNEL
121 P:C RF WAKE HR
122 P:C RF WAKE MN
206-4232
Value Range Default Value
0 ~ 255 0
0 ~ 255 0
0 ~ 255 0
0 ~ 255 0
0 / 1 1
0 ~ 5 5
0 / 1 0
0, 1, 17 1
0 / 1 1
0 / 1 0
0 ~ 2 1
0 ~ 2 1
0, 1, 2, 5, 6 0
0 / 1 1
0 ~ 4 2
0 ~ 9 7
0 ~ 2 0
1 ~ 200, 255 255
0 ~ 4 4
0 / 1 1
0 ~ 255 0
0 / 1 0
0 / 1 0
0 / 1 0
1, 3, 7 3
0 ~ 135, 255 255
0 ~ 23, 128 128
0 ~ 59 0
Caution: Installer Menu settings may affect options available
from the TV setup menus or the Function Menu.
Brief Description of Function
User programmable number, most significant byte.
User programmable number, most significant byte - 1.
User programmable number, most significant byte - 2.
User programmable number, least significant byte.
Enforces rigid MPI checksum.
Relaxes MPI timing to be compatible with PC-based Windows-
Removes block hours setting for Parental Control and makes block permanent.
Dependent on item 093 RJP AVAILABLE setting. Set to 0 to disable RGB input.
Set to 1 to enable RGB input. Set to 17 for Auto Configure.
If set to 1, audio is muted if no signal is present.
If set to 1, display panel buttons are locked. IR is still functional.
Set to 0 to disable HDMI 2. Set to 1 (DTV Mode) or 2 (PC Mode), as
applicable, to enable HDMI 2.
Set to 0 to disable HDMI 3. Set to 1 (DTV Mode) or 2 (PC Mode), as
applicable, to enable HDMI 3.
Set to 0 to disable. Set to 1, 2, 5, or 6 for HDMI or DVI Mode. (See
detailed descriptions.)
Set to 0 to disable feature on Function Menu. Set to 1 to enable feature on
Sets default aspect ratio at power up. See detailed descriptions and item 106.
Set as required in accordance with external audio equipment connected to the
TV. See detailed descriptions.
Set to 0 to disable Pro:Centric operation. Set to 1 for Flash Mode. Set to 2 for
GEM (Java Application) Mode.
Sets the level of the TV picture back lighting. (See detailed descriptions.)
Set to 1 (default) for Physical Channel scan. Set to 0 for Virtual Channel scan.
Selects Minor Start Channel. Set to 0 for NTSC.
To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on
Set to 0 for Normal. Set to 1 for Blank.
Set to 0 for Normal. Set to 1 to load presets for all Installer Menu settings.
Determines the powered status of the embedded b-LAN module and the
GAME CONTROL/MPI port. (See detailed descriptions.)
Set to 0 to disable. Set from 1 to 135 to match the RF channel number used by
the Pro:Centric server as its data channel. Set to 255 to use Auto Search to
find the Pro:Centric RF channel. (See detailed descriptions.)
Sets the hour for Wake On RF. The value "128" is displayed as "OFF." Directly
entering 128 turns the Wake On RF feature OFF.
Sets the minute for Wake On RF.
Installer Menu (Cont.)
controlled systems.
Function Menu.
Selects ATSC band.
power cycle.
23