Table of Contents
Advertisement
OPERATION
BASIC OPERATION
SWITCHING ON/OFF THE UNIT
When connections completed, press
button (1) to switch on the unit. When
system is on, press and hold
to turn off the unit.
CONTROL PANEL RELEASE
Press
button (21) to detach the
removable control panel.
SOUND ADJUSTMENT
Press the SEL button (5) shortly to select
the
desired
adjustment
adjustment mode will change in the
following order:
VOL
BAS
TRB
(Volume) (Bass) (Treble) (Balance) (Fader)
By using the volume
(2&3), it is possible to adjust the desired
sound quality.
SYSTEM SETTING
Press and hold the SEL button (5) on the
front panel to enter system setting mode.
Then shortly press the SEL button (5) to
select the item you want to change and use
the volume
/
change the corresponding setting.
1) BEEP ON/OFF
Use the volume
to set Beep sound ON or OFF.
2) AREA EUR/USA
In radio mode, use the volume
/
buttons (2&3) to set the
different area frequency spacing.
3) HOUR 12H/24H
Use the volume
to set 12Hours or 24Hours format
4) DIM HI/MID/LOW
In this menu, use the volume
buttons (2&3) to change the brightness
of the backlight among High, Middle and
Low.
5) PCLK ON/OFF
Use the volume
to set clock on or off when power off,
button (1)
mode.
The
BAL
FAD
/
buttons
buttons (2&3) to
/
buttons (2&3)
/
buttons (2&3)
/
/
buttons (2&3)
when set PCLK ON, clock will appear
with backlight on when power off.
6) TV OFF/ON
Use the volume
to set TV on or off.
How to set it please refer to the <iPhone
Operation> below.
7) TA SEEK/ALARM
Use the volume
(2&3) to set TA SEEK or TA ALARM.
Traffic announcements
TA SEEK:
function the unit searches for a
station with traffic announcements.
TA ALARM: No automatic station
search. The unit sounds a beep
tone if no traffic information is
received
displayed. SEEK PI is displayed if
the selected station does not
transmit an RBDS signal.
LOUDNESS
Press BND/LOUD button (18) for several
seconds to reinforce the bass output and
"LD ON" will appear. Press it for several
seconds again to release this function.
SET THE CLOCK
Shortly press the DISP button (4) until the
clock is shown on the display. Then hold
the DISP button (4) until the clock flashes.
Then press TUN
the minutes and press TUN
to adjust the hours.
DISPLAY INFORMATION
Press DISP button (4) to operate as the
conversion of each display mode.
EQUALIZATION
Press EQ button (6) shortly to turn on
equalization function and to select desired
audio mode. There are five kinds of mode
as below:
→ FLAT→CLAS→POP M→ROCK M→EQ OFF
8
/
buttons (2&3)
/
buttons
With
activated
and
NO
TP/TA
(10) button to adjust
button (9)
TA
is
Advertisement
Table of Contents
