Zte Director User Manual page 141

can be well below the maximum value. This is
because the phone is designed to operate at
multiple power levels so as to use only the power
required to reach the network. In general, the
closer you are to a wireless base station antenna,
the lower the power output.
The exposure standard for wireless devices
employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit
set by the FCC is 1.6W/kg, and 1.6W/kg by
Industry Canada.
This device is compliance with SAR for general
population /uncontrolled exposure limits in
ANSI/IEEE C95.1-1992 and Canada RSS 102,
and had been tested in accordance with the
measurement methods and procedures specified
in OET Bulletin 65 Supplement C, and Canada
RSS 102. This device has been tested, and meets
the FCC, IC RF exposure guidelines when tested
with the device directly contacted to the body.
The FCC has granted an Equipment Authorization
for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF
exposure guidelines. SAR information on this
model phone is on file with the FCC and can be
found under the Display Grant section of
www.fcc.gov/oet/ea/fccid after searching on FCC
141