Setting up the optional speaker bar
Installing the speaker bar
To install the speaker bar:
1
2
3
4
5
10
Using Your Gateway Flat-panel Monitor
Headphone jack
Bass port (for bass sound). Do
not block.
Tip
When using the speaker bar with a DVI connection, we recommend that you
use the right-angle DVI cable so the speaker bar does not obstruct the cable.
Tilt the screen back, then center the speaker bar below the screen. Make sure that the
speakers face forward.
Tighten the two thumbscrews on the back of the speaker bar.
Connect the speaker bar's USB power cord to any available USB port on your computer.
Connect the speaker bar's headphone (green) and microphone (pink) cables to your
computer's headphone and microphone jacks.
If it is not already on, turn on your computer.
Power/Volume control
Kensington lock slot
Power indicator
Microphone jack Headphone jack
Bass port