Encrypt Button Behavior - ZyXEL Communications PLA-401 Series User Manual

Chapter 4 The ENCRYPT Button

4.4 ENCRYPT Button Behavior

The following table summarizes the actions that occur when the ENCRYPT button
is pressed for specific lengths of time.
Table 3 Time ENCRYPT Button is Pressed and Action
TIME ACTION
less than The device joins a network.
3 seconds It shares the same network
name as other devices on
the network.
more than The device leaves any
10 network it is associated with
seconds and its network name
assumes a random value.
See Troubleshooting in
ENCRYPT button and the lights.
34
POWER LIGHT BEHAVIOR
The power ( ) light blinks
until the device is
connected. This may take a
minute.
The power ( ) light blinks
several times and then
shines steadily.
Chapter 8 on page 76
HOMEPLUG LIGHT
BEHAVIOR
The HomePlug (
turns on if your device is
connected to another
powerline device or a
powerline network.
The HomePlug (
blinks red one time and
then turns off when it
disconnects from the
powerline network.
for suggestions on problems with the
PLA-401 Series User's Guide
) light
) light