Polycom 37477 Feature Profile page 3

Feature Profile 37477
Using Headsets with Polycom Phones
Cable/Adapter Type
RJ-9 to 2.5 mm adapter
Compatible Headset Types
Polycom phones and supported headsets have 2.5 mm, RJ-9 (sometimes called modular or
direct-connect), USB, or Quick Disconnect/Easy Disconnect (QD/ED) interface types. Polycom
phones are compatible with a number of different headset types, including analog, USB,
electronic hookswitch
headset types and models. Other headset models may function with your Polycom phone but
have not yet been tested by Polycom.
Note: Using Sennheiser headsets with the SoundPoint IP 430 phone
The SoundPoint IP 430 phone is not supported by UC software version 3.3.0 or later. As a
result, Sennheiser headsets are not officially compatible with the IP 430.
Compatible Analog Headsets
Analog, or wired, headsets are compatible with a wired connection to most Polycom phones
using one of the interface cables or adapters described in
Cables or Adapters.
To learn more about connecting your analog headset to your phone, visit your headset
manufacturer's website in
Table 3: Compatible Analog Headsets
Manufacturer Model
Polaris Soundpro Monaural Noise Canceling
Headset (SP10N/TT4)
Manufacturer
Polycom
(EHS), and Bluetooth
Manufacturer Support.
Part Number or Model
SKU 2200-11095-002
(Packs of five, valid for use worldwide.
Refer to Polycom part number when
ordering.)
headsets. The following tables list the supported
Table 2: Required Phone Interface
Compatible phones
All
Additional device(s)
needed
Polaris TT4
Soundshield 3G
amplifier
3