Changing The Player Name - Gateway DVD Player User Manual

Auto IP
Static (Manual)
Important
5
Highlight
6
Press
SETUP

Changing the player name

To change the name of the player on the network:
1
On the player's remote control, press
to Setup screen opens.
2
Highlight
3
Highlight
0-9 buttons — Press repeatedly to select the desired character, then
press the
character.
CLEAR
4
Highlight
5
Press
SETUP
— Lets the player obtain an IP address for itself.
— Lets you set the IP address and Subnet Mask.
Static IP addresses are numeric addresses that you assign
to uniquely identify your network devices. Only
experienced network users should manually set the
IP address.
If you select Static (Manual), press the
"Set," then manually enter the IP address and Subnet
Mask with the 0 through 9 buttons. Highlight OK, then
press ENTER to save and exit.
, then press
OK ENTER
or to close the Welcome to Setup screen.
RETURN
, then press
Network
, then use the following buttons to name the player:
Player Name
— Press to move the text insertion point left and right.
button to save the character and move to the next
— Press to erase a character.
, then press
OK ENTER
or to close the Welcome to Setup screen.
RETURN
www.gateway.com
.
, then press
STOP
.
ENTER
.
Setting up the network
button to select
. The Welcome
SETUP
29