Setting The Ip Address - Gateway DVD Player User Manual

Chapter 2: Setting Up Your Player

Setting the IP address

While connecting to a network, networked devices are assigned a unique
identifier known as an IP address. IP addresses are used to direct network traffic
to the correct destination. An IP address is usually displayed as numbers
separated by periods, such as 192.168.0.2.
To change the way the IP address is assigned:
1
On the player's remote control, press
to Setup screen opens.
2
Highlight
3
Highlight
4
Press the
Important
28
, then press
Network
.
IP Address
buttons to choose one of the following:
— Automatically assigns an IP address and provides other
DHCP (Auto)
configuration information (recommended)
DHCP (Dyanamic Host Configuration Protocol) is an
Internet protocol for automatically configuring computers
that use TCP/IP. DHCP can be used to automatically
assign IP addresses and to provide other configuration
information.
www.gateway.com
, then press
STOP
.
ENTER
. The Welcome
SETUP