Insignia NS-37D20SNA14 User Manual page 23

Insignia 37" LED TV
Using DVI (same as HDMI but requires an audio connection)
Note
You must use the HDMI 1 (DVI+ARC) jack to connect a DVD or Blu-ray
player using DVI. If you use another HDMI jack, you will not hear sound from
the TV speakers.
On your TV
HDMI cable 3.5mm audio
connector cable
connectors
HDMI 1
DVI AUDIO
(DVI+ARC)
IN jack
jack
To connect a DVD or Blu-ray player using DVI:
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
adapter to the DVI OUT jack on the DVD or Blu-ray player.
3 Connect the other end of the cable to the HDMI 1 (DVI+ARC) jack on the side of your TV.
4 Connect a 3.5mm audio cable (not provided) to the DVI AUDIO IN jack on the side of your TV and to the AUDIO
OUT jacks on the DVD or Blu-ray player.
Note
When you connect the audio using the DVI AUDIO IN jack, the audio output
is analog.
5 Plug your TV's power cord into a power outlet, then turn on your TV.
6 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
7 Press INPUT to open the INPUT SOURCE list.
8 Press or to select HDMI 1, then press ENTER.
HDMI cable with
HDMI-DVI adapter
DVD or Blu-ray player
3.5mm audio cable
www.insigniaproducts.com
Side of TV
19