Connections; Connecting To A Tv; Connecting To An Audio System; Connecting To A Network - Samsung BD-E5400 User Manual

Connections
Connecting to a TV with an HDMI Cable
1. Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the
HDMI IN terminal of your T_4 See page 8.
2. Turn on the player and T_
3. Press the input selector on your TV remote control until the HDMI signal from the player
appears on your TV screen.
4. If this is the first thne you have turned on the Blu-ray player, the Initial Settings screen
appears. See page 8.
,z!.:sNOTE
• An HDMI c ableoutputsdigitalvidedaudio,so youdon'tneedto connectanaudiocable.
• If the playeris connected to yourTVinthe HDM1720p,1080i,or 1080poutputmode,youmust usea
Highspeed(category 2) HDMIcable.
• HDMI o utputsonlya puredigitalsignalto the 1V.
If yourTVdoesnot supportHDCP (High-bandwidth D igitalContentProtection), randomnoiseappears on
the screen.
• Depending onyourTV,certainHDMIoutputresolutionsmaynot work.Please refer to the usermanual o f
yourTV.
• Whenyouconnectthe playerto theTVusingthe HDMIcablefor the firsttime or to a new1V,the HDMI
outputresolutionwill beautomatically setto the highest s upported by the TV.
• A longHDMIcablemaycausescreennoise.If this occurs, s et DeepColor to Off inthe menu.
• If youusean HDMI-to-DVI cableto connectto yourdisplay device,you mustalso connectthe DigitalAudio
Outto anaudiosytemto hearaudio.
Connecting to an Audio System (HDMI supported AV receiver)
1. Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the
HDMI IN terminal of your AV receiver. See page 8.
2. Using an HDMI cable, connect the HDMI OUT terminal of the AV receiver to the HDMI IN
terminal of your T_4
3. Turn on the player, _ and AV receiver.
4. Using the input select button of the AV receiver and T_, select the correct HDMI input or
source on each to hear sound and see video from the player. Refer to your AV receiver's
user manual to set the AV receiver's audio input.
5. If this is the first time you have turned on the BD-ray player, the Initial Settings screen
appears. See page 8.
This player lets you use network based services, such as BD-LIVE, and download software
upgrades when 't is connected to a network. We recommend using a Broadband modem (with
integrated router) or an IP router for the connection. For more information on router connections,
refer to the user manual of the router or contact the router manufacturer for technical assistance.
Wireless Network
1.
2.
You can connect this unit to a network via a wireless connection. See page 8.
Set the network options. See pages 10-12.
NOTE
• If yourwirebss routersupportsDHCP, this phyer canusea DHCP or staticIPaddress to connectto the
wirelessnetwork.
• Setyourwirebss routerto hfrastructuremode.Adhocmodeis not supported.
• Theplayersupportsonlythe foflowing wirebss securitykey protocob:
- WEP(OPEN/SHARED), WPA-PSK ( TKIP/AES), WPA2-PSK ( TKIP/AES)
• Selecta channel o n the wirelessrouterthat is not currentlybeingused.If the channel s et for the wireless
routeris currentlybeingusedbyanotherdevicenearby, i t ,&,ill r esultin interference andcommunication
failure.
• If yousebct the PureHigh-throughput (Greenfield) 802.11 n modeand setthe Encryption type onyour
routerto WEP, TKIP or TKIP-AES (WPS2Mixed), the player will notsupporta connectionincompliance with
newWi-Ficertification specifications.
• WirelessLAN, b y itsnature,maycauseinterference, dependingonthe operating conditions(router
performance, distance,obstacles, i nterference by otherradiodevices,etc).