Connections; Connecting To A Tv - Samsung UBD-M7500 Full Manual

Connections

Connections

Connecting to a TV

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI
IN jack on your TV.
- Do not connect the power cord to the wall outlet until you have made all the other connections.
- When you change the connections, turn off all devices before you start.
POWER
POWER OPTICAL
DIGITAL
AUDIO OUT LAN
| NOTES |
\ Optimum picture quality is automatically obtained (HDMI UHD Color - On) when the player is
connected to a Samsung UHD TV.
\ To use the Anynet+ (HDMI-CEC) function, connect the HDMI cable to the HDMI terminal.
\ If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the
DIGITAL AUDIO OUT on the product to an audio system to hear audio.
\ An HDMI to HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
\ Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual
of your TV.
\ When you connect the product to your TV using an HDMI cable or to a new TV, and then turn it on for
the first time, the product automatically sets the HDMI output resolution to the highest supported by
the TV.
\ A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu.
\ To view video in the HDMI 720p, 1080p, or 2160p output mode, you must use a high speed (category
2) HDMI cable.
MAIN
( )
HDMI OUT
12
OPTICAL
DIGITAL
AUDIO OUT LAN
Audio
Video
English
MAIN
( )
HDMI OUT