Remove Packing Materials; Remove Storage Drawer - GE PGS908 Installation Instructions Manual

Installation Instructions
J-_ REMOVE THE DOOR JF
Door removaJ is not a requirement for
instaJJation of the product, but is an added
convenience. To remove the door:
[] UNLOCK HINGES
Push both hinge Jocks down toward the
door frame, to the unJocked position. This
may require a fiat Made screwdriver.
Hinge
unlocked
position
Hinge' /
slot
arm
[] POSiTiON DOOR
PJace hands on both sides of the door, and
close the oven door to the removaJ position.
This is haJf way between the broil stop and
fuJJy cJosed.
[] REMOVE THE DOOR IF
NECESSARY (cont.)
[] LIFT OFF DOOR
Lift door up and out until the hinge arms
clear the slots.
DO NOT LIFT THE DOOR BY THE HANDLE.
NOTE: The oven door is very heavy. Be sure
you have a firm grip before lifting the oven
door off the hinges. Use caution once the
door is removed. Do not lay the door on its
handle. This could cause dents or scratches.
Hinge clears slot
REMOVE PACKING
MATERIALS
Also remove labels on door, plastic on trim
and panel and all tape around the range.
[] REMOVE STORAGE DRAWER
[] Pull the drawer out until it stops.
[] Lift the front of the drawer until the
stops clear the guides.
Rail
Stop
[] Pull forward and remove the drawer.