Garrett Metal Detector GTI 1500 Owner's Manual page 22

. Your GTI 1500 begins operating with all
settings at factory-set levels. Any of the
settings can be easily changed, but you
many never want to do so! It is recom-
mended that you use the factory settings
the first few hours you hunt with your
detector.
Scanning
Swing the searchcoil back and forth in
front of you in a straight line or slight arc
as shown in the photograph atop the fac-
ing page. Keep the searchcoil moving at a
rate of about one to three feet per second.
Maintain your coil at a height of one to
two inches. The coil should be kept level
at all times.
22 - Garrett Metal Detectors