Tips And Troubleshooting; Stereoscopic 3D Is Not Working - Nvidia 3D Vision Pro User Manual

TIPs anD TRoUblesHooTInG

06
tiPs aNd trOUblesHOOtiNG
nVIDIa provides an online knowledge base system with
answers to most common questions available 24x7x365.
You can also use it to submit questions online to our
technical support staff. .

Stereoscopic 3D is not Working

> Check and make sure that stereoscopic 3d is enabled. Review
section 3 of this guide.
> Windows Vista or 7 only: Run the setup Wizard to verify your
hardware is operating properly. Go to the nVIDIa Control Panel
(right click on the desktop). select Set Up Stereoscopic 3D. Then
select Run Setup Wizard from Test Stereoscopic 3D drop down
menu.
> Ensure your glasses are fully charged.
You can check the battery level of your glasses by pressing
the Control button.
•
If the light next to the button is green, you have charge.
•
If the light is red, you have less than two hours remaining and it
is recommended that you recharged your glasses.
•
Check the battery level in the control panel
•
If the light does not turn on, the battery is drained and the
glasses must be recharged.
> If you are charging the glasses by connecting them to your PC
using a Usb cable, make sure your PC does not go into power
save mode. When your PC goes into power save mode, the
27