Stereoscopic 3D Display Type - Nvidia 3D Vision Pro User Manual

nVIDIa ConTRol Panel
on the Set Up Stereoscopic 3D screen, you adjust the depth amount
by adjusting the slider to the desired amount. The depth setting
on this slider indicates the depth amount for all supported applications
when they are launched.
You can also change the depth amount by adjusting the thumb wheel
on the back of the Hub. any adjustments you make on the
thumb wheel is reflected on the Depth slider in the nVIDIa
Control Panel.
another way to change depth while in a supported
application is to use the keyboard shortcut keys:
> To decrease depth, use Ctrl+F3 (default shortcut keys)
> To increase depth, use Ctrl+F4 (default shortcut keys)
any adjustments you make using keyboard shortcuts is
reflected on the Depth slider in the nVIDIa Control Panel.

Stereoscopic 3D Display Type

The Stereoscopic 3D display type is a drop-down list of all 3D Vision
Ready displays that were found by the setup Wizard. This list is
populated by the Wizard. If you had more than one 3D Vision-Ready
display attached during setup, they will be reflected in the list.
Thumb wheel to adjust
depth while in a
supported application
25