Basic Operation; Power On/Off; Using The Osd Menu - Planar PLL2410W User Manual

Basic Operation

Before using the LED LCD Monitor:
Connect external equipments properly.
Insert the power plug, and the power LED indicator will light orange.

Power On/Off

To turn the LED LCD Monitor on/off:
Press POWER button on the front of LED LCD Monitor. The power LED indicator lights green
when the LED LCD Monitor is on.

Using the OSD Menu

You are able to use OSD menus to adjust various settings by using menu button on the front of
the LED LCD Monitor.
Display main menu
1
Exit from OSD menu
Confirm the selection
2
Selects between VGA, DVI or Auto mode / Press the button for three
seconds to auto adjust the image (VGA only)
Select the desired item when in OSD menu
▼
When not in OSD menu, directly enters Contrast/Brightness Setting menu.
Select the desired item when in OSD menu
▲
When not in OSD menu, directly enters Preset Mode
▼ + ▲ Recall both of Contrast and Brightness (when not in OSD menu)
OSD Lock Out Function
When LED LCD Monitor is in normal display, you can enable the "OSD Lock Out" function.
Option 1: OSD lock – all 4 buttons are locked except the "POWER" button.
Press and hold the 1 button and the ▲ button for 3 seconds to lock the OSD buttons.
The LED LCD Monitor will show an "OSD Lock Out" message for 5~10 seconds and the message
will disappear automatically.
Repeat this step to unlock.
7