Operation And Programming; Heating And Cooling Control; Operating Modes - homexpert THR872CUK User Manual

Operation and Programming

Heating or cooling control
The thermostat is pre-set to control only your heating system. If
Press and hold both buttons for 5 seconds
installed and set up correctly, it can also be used to control your
Thu 30/12/10
cooling system.
23.
°
To switch between heating and cooling, press and hold the p and q
12:34
PM
5
buttons until the screen changes.
Room Temp
NOTE: The thermostat will not switch to cooling control unless you
enable this feature (see pages 30-31).
Heating changes to cooling
NOTE: Program schedules for heating and cooling must be set
separately (see page 13).
Thu 30/12/10
23.
°
12:34
PM
5
Cooling
10
homexpert
Operating modes (auto, manual, off)
Auto: Program controls temperature Press the mode buttons to select how the thermostat operates:
Thu 30/12/10
21.
°
12:34
PM
0
Room Temp
AUTO MAN OFF
Manual: Press p/q to set temperature
Thu 30/12/10
23.
°
12:34
PM 5
Room Temp
AUTO MAN OFF
NOTE: You can press any of these buttons — Auto, Manual or Off —
to cancel any programming task and exit without saving changes.
by Honeywell THR872CUK Wireless Programmable Thermostat
tm
Auto: In this mode the thermostat follows a program
schedule to maintain a comfortable temperature when you
are home and reduce energy costs while you are away (see
pages 12-13).
Manual: This mode turns off the program schedule to
maintain a constant temperature. Press the p or q
buttons to set the temperature you want. The temperature
will remain at the level you set until you change it, or until
you press AUTO to resume the program schedule.
Off: When the thermostat is off, the heating system runs
only as needed to maintain a minimum temperature to
protect your home. This level is set at 5°C, but you can
change it if necessary (see page 28).
11