Starting Up/Shutting Down; Using The Touchpad; Basic Operation - Panasonic Toughbook CF-47 Series Supplementary Instructions Manual

Starting Up/Shutting Down

Starting Up
1
Open the display
2
Turn your computer on
3
Select your operating system
Select "Windows NT Workstation Version 4.00" and press Enter .
4
Logon
Wait for 10 seconds after confirming that the HDD access has been completed, then press Ctrl + Alt
+ Del .
5
Input your password
Input the user name and password, then press [OK]. If [Cancel] is clicked, the computer will return to
the initial [Begin Logon] display. Until the correct user name and password are entered, the computer
will not operate.
6
Select your application
You are able to start working on your computer.
Using the Touch Pad
The touch pad driver is not installed.
(Use the touch pad to move the cursor (
( Operating Instructions page12)
NOTE
The power saving function is factory set to remove power from the LCD if the computer is not
operated or no access is made to a device for two minutes. The LCD will resume normal operation
if the touch pad is moved or if a key on the keyboard is depressed.

Basic Operation

Function
Moving the Cursor
Tapping/Clicking
Double-Tapping/
Double-Clicking
Dragging
( Operating Instructions page 12)
below) on the display and perform normal computer operations.)
Touch Pad Operation
Move the tip of your finger
lightly over the surface.
or
tapping
or
double-tapping
or
Two quick taps, but on
the second tap leaving
your finger down (apply-
ing pressure) and moving
it on the work surface.
clicking
double-clicking
While holding down the
button, moving your fin-
ger on the work surface.
5