Restore Factory Settings; Phone Software Updates; Download - Nokia 6085 User Manual

S e t t i n g s
the security code when the SIM
card's memory is selected and you
want to change the memory in
use.
Access codes — to set the PIN
code or UPIN code in use, or to
change the security code, PIN
code, UPIN code, PIN2 code, and
call barring password.
Code in use — to select whether
the PIN code or UPIN code should
be active.
Authority certificates
certificates — to view the list of
the authority or user certificates
downloaded into your phone. See
"Certificates" p. 93.
Security module settings
view Security module
activate Module PIN
change the module PIN and
signing PIN. See also
codes" p. 13.
■ Restore factory
settings
To reset some of the menu settings
to their original values, select
Menu > Settings
factory sett. and enter the
security code. Data that you have
entered or downloaded is not
deleted. For example, names and
numbers in Contacts
affected.
66
Copyright © 2006 Nokia. All rights reserved.
or User
— to
details,
request, or
"Access
> Restore
are not
■ Phone software
updates
You may initiate phone software
updates from the Phone updates
menu. Also, your service provider
may initiate the updates by
sending them over the air directly
to your device. This function is
known as firmware over the air
(FOTA).
Warning: If you install a
software update, you
cannot use the device,
even to make emergency
calls, until the update is
completed and the device
is restarted. Be sure to
back up data before
accepting a FOTA update.

Download

Select Menu > Settings
> Phone updates
available phone software updates
from your service provider. Select
Current software details
display the current software
version. Select Download phone
software to download and install
a phone software update (if an
update is available). Follow the
instructions on the display.
> Phone
to request
to