Table of Contents
Advertisement
Active Driving Display
ACTIVe DRIVING DISPLAY (if equipped)
The Active Driving Display displays the following information:
To change the settings/adjustments for the Active Driving Display:
1
2
3
NoTe:
• If the display does not operate, switch the ignition off and then switch it back on. If it
• It may be difficult to view the display when wearing sunglasses. Take off your
• If the battery has been removed and re-installed or the battery voltage is low, the
• The display may be difficult to view or temporarily affected by weather conditions such
15
1518135_14d_Mazda3_SSG_070313.indd 15
• Lane Departure warning
System (LDwS) operation
conditions and warnings
• Smart City Brake
Support (SCBS)
warnings
• Vehicle Speed Setting
using cruise control
50
mph
Select the Settings icon on the
Home screen.
Select the AD-Disp tab.
Select the desired item to change.
• Height: Adjust the position of the
virtual image of the Active Driving
Display up or down.
• Brightness Control: Method
for adjusting screen brightness
(Automatically with instrument
cluster illumination or manually).
still does not operate even with the ignition switched ON, have the vehicle inspected at
an Authorized Mazda Dealer.
sunglasses or adjust the luminosity.
adjusted position may deviate.
as rain, snow, light, and temperature.
CAUTIoN:
Always adjust the
display using the Settings screen
(AD-Disp tab). Do not try to
adjust the angle or open/close
the display by hand. Fingerprints
on the display will make it
difficult to view and manual
operation could cause damage.
• Navigation Turn-by-
Turn (TBT) direction,
distance and lane guidance
• Vehicle Speed
0
MPH
• Calibration: Brightness
initialization setting (when
selecting automatic adjustment).
• Brightness: Brightness
adjustment (when selecting
manual adjustment).
• Navigation: On/Off.
• Active Driving Display:
On/Off.
• Reset: Reset to
default settings.
7/3/13 3:13 PM
Advertisement
Table of Contents
