Table of Contents
Advertisement
i-ELOOP
i-eLooP (if equipped)
The Mazda-unique regenerative braking system (i-ELOOP) generates
and stores electrical energy in a capacitor during deceleration. Through
efficient energy regeneration, storage, and usage, fuel economy is
improved. To view i-ELOOP information, select Applications from the Home
screen, then scroll down to Eco and Energy Management.
i-eLooP Pre-Charge Mode
If the capacitor is discharged because of vehicle storage (the vehicle is
parked for long periods of time), the i-ELOOP indicator in the instrument
cluster will flash and a
warning screen appears
on the screen of the
infotainment system.
NoTe:
• If the vehicle is jump started, leave the jumper cables connected until the
warning message is no longer displayed.
• If the vehicle is driven while the warning screen is displayed, a warning sound
will be heard and power steering assist will be limited.
1518135_14d_Mazda3_SSG_070313.indd 34
Capacitor charge level
Regeneration level
Capacitor discharge
Average fuel consumption since reset
60-minute Fuel economy
0-10 min.: Every 1 min.
10-60 min.: Every 10 min.
Average fuel consumption for this drive
Average Current Fuel History:
Average since reset 2nd to 6th history
In Pre-charge
mode
When this warning screen appears, do not drive the
vehicle. Allow the engine to idle until the warning
screen disappears. This time is needed for normal
generator operation.
Driving in Pre-charge mode
34
7/3/13 3:14 PM
Advertisement
Table of Contents
