Vgs-1 Optional Voice Guide & Storage Unit; Voice Memos; Recording A Voice Memo; Playing Back A Voice Memo - Kenwood TK-90 Instruction Manual

VGS-1 OPTIONAL VOICE GUIDE & STORAGE UNIT
When using the optional VGS-1 voice guide &
storage unit, you gain access to the transceiver's
voice recorder and voice announcement functions.
Ask your dealer for details.

VOICE MEMOS

R V M
ECORDING A OICE EMO
You can record up to 4 voice memos, each with a
duration of up to 15 seconds. To record a voice
memo for later playback:
1 Press and hold the key programmed as
Playback 1 to 4 for approximately 1 second to
begin recording. (Each Playback key corresponds
to a memory location of 1 to 4.)
• The duration of recording memory will appear on the
display and begin counting down. The voice memo
can record only the received signal.
Note: Playback keys can be set up for either voice memos or
voice messages by your dealer. The keys function differently
depending on how they are set up, so be sure to press a
Playback key set up for use for voice memos.
2 Press the key to end the recording at any time
and store it into the transceiver memory.
• If the memory becomes full, recording will stop
automatically and store the voice memo to memory.
• "WRITING" appears on the display while the
recording is being stored to memory.
P B V M
LAYING ACK A OICE EMO
To play back a recorded voice memo:
1 Press the key programmed as Playback 1 to 4 to
play back the specified voice memo.
2 Press the key to end the playback at any time.
20
D V M
ELETING A OICE EMO
To delete a recorded voice memo:
1 Press the key programmed as Playback 1 to 4 to
select and play back the specified voice memo.
2 Press the ■ key to delete the recording.
• "DELETE?" appears on the display.
3 Press the ■ key again to confirm the selection and
delete the recording from memory.
• To cancel, press the

VOICE MESSAGES

R V M
ECORDING A OICE ESSAGE
You can record up to 4 voice messages, each with a
duration of up to 15 seconds. To record a voice
message for later playback/transmission:
1 Press and hold the key programmed as
Playback 1 to 4 for approximately 1 second.
(Each Playback key corresponds to a memory
location of 1 to 4).
• "REC/PLAY" appears on the display.
• Press the key to cancel and return to normal
operation.
Note: Playback keys can be set up for either voice messages
or voice memos by your dealer. The keys function differently
depending on how they are set up, so be sure to press a
Playback key set up for use for voice messages.
2 Press the ■ key and speak into the microphone to
begin recording your message.
• The duration of recording memory will appear on the
display and begin counting down.
3 Press the key to end the recording at any time
and store it into the transceiver memory.
• If the memory becomes full, recording will stop
automatically and store the voice message to
memory.
• "WRITING" appears on the display while the
recording is being stored to memory.
key.