Chandler Limited Little Devil Controls And Features

Chandler Limited, Little Devil and the Little Devil Flame Logo are trademarks of Chandler Limited Inc.
All rights reserved.
Thank you for purchasing the Chandler Limited Little Devil Pre Amp. Your Devil is handmade in the USA by real
people. What does that mean? We do not use large solder or component machines that pick and solder the parts.
We pay a real person to do it like they did in the golden age of gear. We do not have most of our work done in
China only to do nal assembly in America and then call it made in USA. We do not use surface mount
components or ribbon cables that have been recently developed to shrink the size and build time of cell phones
and computers. Instead we use time proven through-hole audio components, discrete transistors, and large
transformers just like they did in the golden age of gear.
At Chandler we are proud of our American made products and we hope you like them!
The Little Devil Pre uses a 100% discrete transistor circuit and specially wound transformers. Included are item
descriptions and hints to get you on your way.
Please feel free to call our shop anytime for help or questions.
Prior to sending in your gear for repair, please contact our shop at the number listed below. We will assist you
in troubleshooting the problem and, if needed, we will issue you an RMA# to send in the gear.
Send repairs to: Chandler Limited, Inc.
Attention: Repairs
222 S. Cherry St.
Shell Rock, IA 50670
Phone: (319) 885-4200
Email: support@chandlerlimited.com

Connections -

All connections on the Devils are transformer balanced with pin 2 hot.

Current draw -

Here are the current draw speci cations for the Little Devil Preamp when the Devil is loaded 600 ohm
and operating at a continuous level of unity gain. Please consult your rack and PSU speci cations to
make sure you are not overloading your system.
+16 volt power rail = +95ma
-16 volt power rail = -70ma
Little Devil Pre Amp - Designed by Wade Chandler Goeke