Page 3
IEC power cable. Power is preset internally to operate at either 120V or 220V. INPUT/OUTPUT On the rear panel of the REDD.47 Mic Amplifier exists two XLR jacks, one for input, and the other for output. The XLR input is activated when the MIC/DI switch is set to ‘MIC’ or the up position.
Page 4
Overdriving the REDD.47 can be achieved in the following ways: 1. Use two, REDD.47 units in series, overdriving a second unit with gain from the first unit. a. ‘Revolution’ style – via DI, plug your guitar directly into the first REDD.47, and patch the XLR out from the first unit into a second REDD.47.
Page 6
‘FINE GAIN SET’ for the desired color. If using on your mix bus, turn down your DAW’s master fader enough not to distort the REDD.47’s input (you might not need the PAD ei- ther), then turn up the ‘VOLTAGE GAIN’ and use the ‘FINE GAIN SET’...
All other warranties, express or implied, including the warranties of merchantability or fitness for a particular purpose are disclaimed. Chandler Limited shall not be liable for the loss or use of the product, its components and accessories, inconvenience, loss or any other damages, direct or consequences arising out of the use of, or inability to use the product or its components or damages resulting from or attributable to defects in the products or its components.
Page 9
TORT OR CONTRACT, SHALL NOT BE GREATER THAN THE ACTUAL PURCHASE PRICE OF THE PRODUCT WITH RE- SPECT TO WHICH SUCH CLAIM IS MADE. IN NO EVENT SHALL CHANDLER LIMITED BE LIABLE TO PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND INCLUDING, BUT NOT LIM- ITED TO, COMPENSATION, REIMBURSEMENT OR DAMAGES ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPEC- TIVE PROFITS OR FOR ANY OTHER REASON WHATSOEVER.