Table of Contents
Advertisement
ESTABLISHING WI - FI
If you skipped Wi-Fi configuration during the initial setup, you can
configure it later.
1.
Go to
Settings > Wireless &
2.
The list of available networks will be displayed.
3.
The Device automatically detects security type, and if there's no
need to specify additional data (e.g. pre-shared key), connection
would be established.
4.
Otherwise, you need to specify password and other security set-
tings (if required) manually.
You can read about advanced network configuration in the Wi-Fi Con-
nection chapter of the current User Manual.
OTG - CABLE USAGE
You can connect external devices, such as keyboard or USB flash disk,
using OTG cable (not included to the package). To connect the device,
plug an OTG-cable into micro-USB port of the Device, and connect
an external device to other side.
After connecting a keyboard, it will be detected automatically and
you will be able to use for typing. Settings for external keyboard will
be available in
able/disable misspelling autocorrection, autocapitalization, set the
layout switch keys combinations and select layouts will be used.
After connecting a flash disk, you'll be able to view its content in
usbdisk
folder, using the File Manager.
In section
Settings > Storage > EXTSD
total and free memory on the storage, unmount it for safe ejection
or format it.
AT TENTION!
Formatting a storage will totally erase
GETTING STARTED
Settings > Language &
networks. Check Wi-Fi checkbox
input. From there you can en-
you can view information about
14
all
data on it!
Advertisement
Table of Contents
