How Do I Preview The Destination On Map; How Do I Preview A Route - Navman EZY15/45 MY80T/85XLT/90XLT User Manual

How do I preview the destination on map?

After searching an address (or a POI), you can preview the destination on map to explore the area near the
location. On the Destination screen, tap the
On the destination preview map, you can:
Tap the /
View the information of your destination that is shown at the top of the Map screen.
Tap on a street/area/POI to display the related information of the location near your destination.
Tap the grey arrow icon (
Tap on the map to select the other destination. The information of the selected street/area/POI near your
destination will be displayed.
Tapping the check mark will bring up the Destination screen of the selected location.

How do I preview a route?

Depending on your Navman model, you will be able to plan a route in simulation mode that allows you to:
preview a route.
plan and view a route without a GPS fix, such as when you are inside a building.
The following steps will show you how to preview a route.
1. On the Main Menu, tap
2. Select a departure point through the Leaving from screen.
If you have a GPS fix, you can simply select the Here button (
select a departure point. Otherwise, use the FIND address wizard, Explore map, My Places/Recent places
menu or Home to set the departure point if you want the demonstrated route to start elsewhere.
3. Select a destination point through the Going to screen. When done, tap
button to zoom in/out the map.
) to display your current position on the map.
ROUTE SIMULATION is not available on all models.
.
button to display the destination preview map as below.
12
) so that you do not need to
.