Connect - Navman EZY250LM MY400LMT/MY450LMT User Manual

If you want to ...
change the units of
measurement that
NavDesk uses,
change the Mileage
Reporter settings,
change the NavPix™
library location,
change the location of
where downloaded
updates will be saved,

CONNECT

CONNECT is not available on all models.
CONNECT is a NavDesk application that allows you to search and install local POIs information from your
computer to your Navman. POI locations will be shown in My Places.
Before you begin, ensure your Navman is correctly plugged into your computer: plug the large end of the USB
cable directly into a USB port on your computer (not a USB hub); plug the small end into
of your Navman.
NavDesk CONNECT
Then ...
click General, and then:
select or clear the Use metric units checkbox to change between
imperial and metric units.
select or clear the Use decimal degrees checkbox to change
between decimal degrees and latitude/longitude co-ordinates.
click Mileage Reporter, and then:
select or clear the Warn me when deleting all log files from my
Navman checkbox.
select Distance per volume or Volume per distance to change
the fuel economy style.
click Photo Album, and then click Change.
Select a folder for the NavPix™ library. The downloaded
NavPix™ is moved to the new location.
For more information about configuring your Photo Album, refer
to the "Photo Album" section.
click My Maps, and then click Change.
Select a folder for the updates. The downloaded updates are
moved to the new location.
86
on the bottom