Usb Connection - Olympus VH-520 Instruction Manual

Selecting a method for connecting Selecting a method for connecting
the camera to other devices the camera to other devices
d d [USB Connection]

[USB Connection]

Submenu 2
Set to select the connection
Auto method each time the camera is
connected to another device.
Storage Connect as a card reader.
As a portable device, connect to
MTP PC loaded with Windows Vista/
Windows 7/Windows 8.
● Select [Storage] to use the supplied software.
● Refer to "Connecting with a computer" (p. 39) for the
connection method with a computer.
Selecting the camera sound and Selecting the camera sound and
its volume d d [Sound Settings]
its volume [Sound Settings]
Submenu 2 Submenu 3
Sound Type 1/2/3
Volume 0/1/2/3/4/5
q Volume
0/1/2/3/4/5
Application
Application
Selects the camera
sounds (operation
sounds and shutter
sound).
Selects the operation
volume of camera
buttons.
Selects the image
playback volume.
Adjusting the image processing Adjusting the image processing
function d d [Pixel Mapping]
function [Pixel Mapping]
● This function has already been adjusted at factory
shipping, and no adjustment is needed right
after purchase. Approximately once a year is
recommended.
● For best results, wait at least one minute after
taking or viewing pictures before performing pixel
mapping. If the camera is turned off during pixel
mapping, be sure to perform it again.
To adjust the image processing function To adjust the image processing function
Press the A button when [Start] (Submenu 2) is
displayed.
● The check and adjustment of the image
processing function starts.
Adjusting the brightness of the Adjusting the brightness of the
monitor d d [ [s s ] ]
monitor
To adjust the monitor brightness To adjust the monitor brightness
1 Use FG to adjust the brightness while viewing
the screen, and then press the A button.
s MENU
Back
EN
35