Q Power On; Usb Connection - Olympus SP-820UZ Instruction Manual

Using an Eye-Fi card d d [Eye-Fi]
Using an Eye-Fi card
Submenu 2
All Transfers all images.
Sel. Image Transfers only selected image.
Off Disable Eye-Fi communication.
When using an Eye-Fi card, read the Eye-Fi card
instruction manual carefully, and comply with the
instructions.
Use the Eye-Fi card in compliance with the laws and
regulations of the country where the camera is used.
In locations such as on an airplane, where the Eye-Fi
communication is prohibited, remove the Eye-Fi card
from the camera, or set [Eye-Fi] to [Off].
This camera does not support the Eye-Fi card's
Endless mode.
Selecting a method for connecting the Selecting a method for connecting the
camera to other devices camera to other devices
d d [USB Connection]

[USB Connection]

Submenu 2
Set to select the connection method
Auto each time the camera is connected
to another device.
Storage Connect camera as a card reader.
For Windows Vista or Windows 7,
MTP
connect camera as a portable device.
Select when connecting to a
Print
PictBridge-compatible printer.
When using the attached software, select [Storage].
Refer to "Connecting with a computer" (p. 43) for the
connection method with a computer.
[Eye-Fi]
Application
Application
Turning on the camera with the q
Turning on the camera with the
button d d [ [q

q Power On]

button Power On]
Submenu 2
The camera is not turned on. To turn
on the camera, press the n
No
button.
Press and hold the q button to turn
Yes
the camera on in the playback mode.
Selecting the camera sound and its Selecting the camera sound and its
volume d d [Sound Settings]
volume [Sound Settings]
Submenu 2 Submenu 3
Sound Type 1/2/3
Volume
0/1/2/3/4/5
q Volume
0/1/2/3/4/5
q
Application
Application
Selects the camera sounds
(operation sounds and
shutter sound).
Select button response tone
level and power on sound
level.
Selects the image playback
volume.
EN
37