Olympus SZ-16 Instruction Manual page 33

Viewing the image immediately Viewing the image immediately
after shooting z z [Rec View]
after shooting
Submenu 2
The image being recorded is
not displayed. This allows the
Off user to prepare for the next shot
while following the subject in the
monitor after shooting.
The image being recorded is
displayed. This allows the user to
On
make a brief check of the image
that was just taken.
Automatically rotating images Automatically rotating images
shot with the camera in a vertical shot with the camera in a vertical
position during playback position during playback
z [Pic Orientation] z [Pic Orientation]
● During shooting, the [y] (p. 38) setting on the
playback menu is set automatically.
● This function may not work properly if the camera
is facing up or down during shooting.
Submenu 2
Information about the vertical/
horizontal orientation of the
camera during shooting is not
Off recorded with images. Images
shot with the camera in a vertical
position are not rotated during
playback.
Information about the vertical/
horizontal orientation of the
camera during shooting is
On
recorded with images. Images
are automatically rotated during
playback.
[Rec View]
Application
Application
Displaying icon guides Displaying icon guides
z [Icon Guide] z
[Icon Guide]
Submenu 2
Off No icon guide is displayed.
The explanation of the selected
icon will be displayed when a
shooting mode or function menu
On
icon is selected (position the
cursor on the icon for a while to
display the explanation).
Icon guide
Imprinting the date of recording Imprinting the date of recording
z z [Date Stamp]
[Date Stamp]
Submenu 2
Off Do not imprint the date.
Stamp new photographs with the
On
date of recording.
● When the date and time are not set, [Date Stamp]
cannot be set. "Turning on the camera and making
the initial settings" (p. 7)
● The date stamp can not be deleted.
● When drive settings are set to other than [o],
[Date Stamp] cannot be set.
Application
P P
Program Auto
0.0 0.0
WB WB
AUTO AUTO
ISO ISO
AUTO AUTO
Functions can be
16
changed manually.
4:3
MENU MENU
Application
EN
M
33