Kenwood 103AR Instruction Manual page 8

¸¸!¸¸¸¸¸¸¸¸¸
_i_iiiiiiii_iii
MUTE indicator LOUDNESS indicator MEMORY mdlcator
SPEAKERS indicators
I
/ i SPEAKIERSi MUTE LOUDNESS MEMORY
!i.... 4
8roadcasl band indicators
Frequency display,
Input display,
Preset channe{ display
TUNED indicator
lO3AR (En]
ilion mode
ldicator
I mode indicator
Oisplay
KENWOOD
I
O PDWER key
Switches the power ON/OFF
@STANDBY indicator
@LEVEL MODE key
Press when adjusting the tone
@LEVEL CONTROL keys
Press to adjust the tone
@BAND key
Press to switch the broadcast band
@INPUT SELECTOR knob
Turn to select the input sources
@VDLUME CONTROL knob
@PHONES jack
Used for headphone hstenmg
@ LOUDNESS key
Press to enhance low frequencies
@ MUTING key
Press to mute sound temporariry
@SPEAKERS A/B keys
Press to select the A and/or B speaker
systems
@Numeric keys
@AUTO/MANUAL key
Press to select the auto tuning mode
@DIRECT key
Press for direct station tuning based on
numerical input
@MEMORY key
Press to preset a station in the memory
@P,CALL keys
Recalls preset stations
@TUNING keys
Press to tune broadcast stations
About the STANDBY indicator
Thisumt has a STANDBY indicator When the STANDBY indlcator is lit, theumtconsumesasmallamount of power to preserve the memory
This =s called STANDBY mode This mode also lets you turn the power ON/OFF using the remote control