Kenwood 103AR Instruction Manual page 10

103AR (_n)
,f_ •,
%o
_ " 0
: Keys or controls to be used in this operation
1
Turn the power ON.
Select the SPEAKERS key setting.
The indicators of the speaker _
systems to be used should _m -- TI
°p. I- L..
Select the input source.
Adjust the volume.
VO_.IJ_AE CO_
A, B OFF
Sound is not output from the speakers Use this setting for listening
through headphones, etc
A ON
Sound is output from the speakers connected to the SPEAKERS A
terminals on the rear panel
8ON
Sound is output from the speakers connected to the SPEAKERS B
terminals on the rear panel
A, BON
Sound is OUtput from t he speakers connected to the SPEAKERS A and
B terminals on the rear panel
The input sources are switched in the following order
f _)TUNER frequencydspay) 'heiseleeteds°k '_'_,_,,T_'_X_''L','n''r'_ --.'sd'splayed ....
t_ (S; TAPE (M_)* I "n
I
L .U
If a KENWOOD MD recorder connected through the system
remote control cord in the ISL16] mode, it is necessary to
change the TAPE input to MD input usqng the following proce-
dure
(I" Select the input name to be chan ed,
2' Press rand hold the AUTO/MANU_L key for more than 2
seconds.