5-Tone Signaling; Making A Selcall (Selective Call ); Ransmitting Atatus Essage - Kenwood TK-7180 Instruction Manual

5-tone Signaling is enabled or disabled by your dealer. This function opens the
squelch only when the transceiver receives the 5 tones programmed in your
transceiver. Transceivers that do not transmit the correct tones will not be heard.
Note: Your transceiver functions include either 5-tone Signaling or FleetSync {page 15}, but not both.
M S (S
AKING A ELCALL
A Selcall is a voice call to a particular station. To make a Selcall:
1 Select your desired zone and channel.
2 Press the key programmed as Selcall or Selcall + Status to enter Selcall
Mode.
3 Press the <B and C> keys to select the ID of the station you want to call.
• If programmed by your dealer, you can also use the
• Alternatively, you can enter a station ID using a DTMF keypad.
• If Manual Input Mode is enabled, you can enter digits by using a DTMF keypad or
by selecting digits with the
and hold the S or DTMF
digits to select a digit. The cursor can be shifted to the left or right by pressing the
<B or C> key. Repeat this process until the entire ID is entered.
4 Press the key programmed as Call 1 to Call 6 to begin your call.
T S
RANSMITTING A TATUS
Status messages can contain up to 16 alphanumeric characters. To transmit a
Status message:
1 Select your desired zone and channel.
2 Press the key programmed as Status to enter Status Mode or Selcall +
Status to enter Selcall Mode.
• When using the Status key to enter Status Mode, the station ID is fixed and cannot
be selected. Skip to step 5 to continue.
3 In Selcall Mode, press the <B and C> keys to select the ID of the station you
want to call.
• If programmed by your dealer, you can also use the
• Alternatively, you can enter a station ID using a DTMF keypad.
• If Manual Input Mode is enabled, you can enter digits by using an optional DTMF
keypad or by selecting digits with the
first press and hold the S or DTMF
through the digits to select a digit. The cursor can be shifted to the left or right by
pressing the <B or C> key. Repeat this process until the entire ID is entered.
4 Press the S or DTMF

5-TONE SIGNALING

C )
ELECTIVE ALLING
and
key. When using the
M
ESSAGE
key to enter Status Mode.
and
keys. To enter manual input mode, first press
and
and
and keys. To enter manual input mode,
key. When using the
keys.
keys, cycle through the
keys.
and keys, cycle
13