Display Units - II Morrow Inc. Precedus User Manual

This option controls the way navigation units of measure
Display
Units
show on the display. The units of measure you select show
consistently throughout all screens in all operating functions.
You also can set the Magnetic Variation and Map Datum.
Units of measure for each navigation parameter:
Distance - nm/kts (nautical miles/knots); sm/mph
(statute miles/miles per hour); km/kph
(kilometers/kilometers per hour)
Altitude- feet; meters
Lat/Lon - d-m.mmm; d-m-s.s (where d=degrees,
m=minutes, s=seconds of latitude or longitude), and UTM
Press or
number value for CDI. Press
to select the distance off your
course where the Precedus alerts you. The
number you select is the distance from the
center to the left or right side of the CDI
scale in the NAV function. Press
highlight the ON/OFF option. Press
or to select "YES" or "NO." If you
choose "YES" for the alert message, the
course deviation alert will show on the
display advising you when course
deviation exceeds the CDI scale maximum
value left or right.
Press or
direction for Parallel Track. Press
or to select L/R (Left or Right of
your current course). Now press
to highlight the distance. Press
to select the distance value. This
function allows you to set a course to a
destination that is parallel to your
original course and offset by a distance
you select. The Precedus alerts you
when you exceed this distance.
to highlight the
to highlight the
or
to
or