Table of Contents
Advertisement
The main menu displays the functions available.
The
Main
Menu
Changing settings on any menu option screen is done in the
Changing
Menu
same way. Use the
Option
on the screen to the option item you wish to change. Then
Settings
use the
Use this option to leave the menu function and return to the
Return to
Nav
Navigation screen last viewed.
Screen/Light - (Page 57)
Control settings for display backlight and contrast, status
light programming, and power light programming.
Time and Place - (Page 58)
Contains seed position and current time settings
including UTC differential.
System Setup - (Page 58)
Controls operation mode, either of the two serial ports
for interface with external devices, and the number of
NAV pages shown.
General Info - (Page 61)
Enables showing of unit serial number, current hardware
and software versions, and current databases.
E6B Functions - (Page 62)
Perform calculations of important information related to
temperature, wind, and barometric pressure.
"RETURN TO NAV" is automatically selected
when you press
the wrong menu option or if you decide to
abandon making changes, press the
button again to return to the main menu.
Press the
menu shows on the display, select the
desired option by pressing the
buttons to move the arrow cursor up or
down the list of functions. With the
desired option selected, press the
button to activate it.
buttons to move the highlight
buttons to change the setting.
Note
. If you accidentally select
button. When the main
Advertisement
Table of Contents
