Table of Contents
Advertisement
Cleaning and care
Installing / replacing the
odor-free filter
In recirculation mode, an odor-free filter
must be used in addition to the grease
filters. It is designed to absorb cooking
odors.
It is installed in the canopy above the
grease filters.
Replacement active charcoal filters
can be ordered from Miele.
^ To install or replace the odo-freer
filter, the grease filters must first be
removed as described in the
previous pages.
^ Remove the odor-free filter from the
packaging.
^ Slide the odor-free filter into the rear
of the filter frame, then raise the front
and push it into the frame.
^ Reinsert the grease filters and the
panels.
18
Before first use:
^ Program the filter timer (see
"Operation").
Replace the odor-free filter when:
– the odor-free filter symbol — of the
filter button comes on,
or
– when the filter no longer absorbs
odors efficiently.
However, it should be changed at least
every 6 months.
Used odor filters may be discarded
with the household garbage.
Resetting the odor-free filter timer
After replacing the filter, reset the
odor-free filter operating hours counter.
^ With the fan running, press the filter
button [— twice and hold it for
about 3 seconds, until only the 1
flashes.
The odor-free filter symbol — goes
out.
If you clean the odor-free filter before
the operating time elapses:
^ Press the filter button [— twice and
hold it for about 6 seconds, until only
the 1 flashes.
Advertisement
Table of Contents
